Servo motor is prone to low-frequency vibration at low speed. The vibration frequency is related to the load condition and driver performance. It is generally considered that the vibration frequency is half of the no-load take-off frequency of the motor. This low-frequency vibration phenomenon determined by the working principle of servo motor is very unfavorable to the normal operation of the machine. When the servo motor works at low speed, damping technology should generally be used to overcome the phenomenon of low-frequency vibration, such as adding damper on the motor or subdivision technology on the driver. At present, most servo motors used in computerized embroidery machines are five phase hybrid servo motors. The purpose is to reduce the step torque angle and improve the control accuracy by using stepping motors with high phase number, but the improvement of performance obtained by this method is limited And the cost is relatively high. Using subdivision drive technology can greatly improve the operation quality of servo motor, reduce torque fluctuation, suppress oscillation, reduce noise and improve step torque resolution. If the reactive servo motor is adopted, the performance can be significantly improved and the cost of the product can be greatly reduced. Servo motor is widely used in the industry. The following is a brief introduction: 1 It is widely used in ATM machines, inkjet machines, lettering machines, photo machines, spraying equipment, medical instruments and equipment, computer peripherals and mass storage equipment, precision instruments, industrial control systems, office automation, robots and other fields. It is especially suitable for applications requiring stable operation, low noise, fast response, long service life and high output torque. 2. Servo motors are widely used in textile machinery and equipment such as computerized embroidery machines. These stepping motors are characterized by low torque, frequent start-up, fast response, low running noise, stable operation, good control performance and low cost.
Special features of akawa sgmph-08aaa2b product:
Σ- V series servo motor sgmps type.
Rated output: 100W (0.1kw).
Power supply voltage: ac200v.
Serial encoder: 17 bit pair value type (standard).
Design sequence: IP67 (standard).
Shaft end: straight shaft, with keyway and screw hole (optional) sgmph-08aaa2b.
Optional: with holding brake (DC24V).
Correspondence of RoHS Directive: comply with ROHS directive.
Medium inertia
Flat type with short depth
Equipped with high-resolution serial encoder (17 bits)
High speed up to 6000r/
Complete varieties (100W ~ 1.5KW, with holding brake)
The standard is ip55sgmph-08aaa2b. Also applicable to IP67 (optional).
Rating and specification:
Rated time: continuous.
Vibration level: V15.
Edge resistance: DC500v, above 10m Ω.
Operating ambient temperature: 0-40 ° C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Edge withstand voltage: ac1500v for 1 minute.
Protection mode: totally enclosed self cooling IP65 (except for shaft penetration part) sgmph-08aaa2b.
Ambient humidity: 20-80% (no condensation).
Connection mode: direct connection.
Rotation direction: counterclockwise (CCW) rotation when viewed from the load side under the forward rotation command.
Parameter specification of akawa sgmph-08aaa2b:
Price of large capacity sgmvv servo motor and Yaskawa servo motor.
Rated output: 45KW.
Voltage: three-phase AC400V.
Serial encoder: 20 bit incremental type.
Rated speed: 1500r /.
Main mechanical structure: price of flange mounted, straight shaft end (without keyway and screw hole) Yaskawa servo motor.
Option: with holding brake (DC24V), with dust seal.
The use of small, low inertia servo motors can also give full play to the mechanical strength.
The new model sgmvv is equipped with products with rated output of 22 ~ 55kW and rated passenger speed of 800r / and 1500r / respectively.
Even if the load changes, it can be stably driven without vibration.
Performance introduction of akawa sgmph-08aaa2b:
Σ- V series servo motor sgmgv type.
Rated output: 1.3KW.
Power supply voltage: ac200v.
Serial encoder: 20 bit incremental type (standard).
Design sequence: Standard (bolt is silver).
Shaft end: straight shaft without keyway (standard).
Optional: with holding brake (dc90v).
Drive the feed shaft of various machines (high-speed feed).
Complete varieties (300W ~ 15kw, with holding brake).
Equipped with high-resolution serial encoder (20 bits).
The standard is IP67.
Usage example:
Machine tool.
Transport machinery.
Handling machinery.
Food processing machinery
Rating and specification:
Rated time: continuous.
Vibration level: V15.
Edge resistance: DC500v, above 10m Ω.
Operating ambient temperature: 0-40 ° C.
Excitation mode: permanent magnet type.
Installation method: flange type Japanese Yaskawa motor.
Heat resistance grade: F.
Edge withstand voltage: ac1500v for 1 minute (200V level), ac1800v for 1 minute (400V level).
Protection mode: totally enclosed self cooling IP67 (except for the shaft through part).
Ambient humidity: 20 ~ 880% (no condensation) Japan Yaskawa Electric Co., Ltd.
Connection mode: direct connection.
Rotation direction: counterclockwise (CCW) rotation when viewed from the load side under the forward rotation command
